Way to Go Builders finishes custom paver project in Los Angeles

Way to Go Builders Inc. completed a residential paver redesign in Los Angeles that replaced aging concrete with a new driveway, front walkway and rear patio. The project mattered because it paired curb appeal with drainage fixes, permitting work and a durable surface built for daily use.

Why it matters: - The project replaced cracked concrete with a unified paving system designed to handle vehicle traffic, foot traffic and outdoor use. - The installation addressed drainage problems that had caused water pooling near the home's entry. - The finished hardscape was intended to improve curb appeal while reducing long-term maintenance for the homeowner.

What happened: - Way to Go Builders Inc., a licensed general contractor based in Los Angeles County, completed a residential paver design and installation project in Los Angeles. - The work covered a new driveway, front walkway and rear patio under a single design-build scope. - The scope included material selection, layout planning, permitting and full installation. - The company managed the project from concept through completion with one in-house team.

The details: - A site assessment found poor sub-base compaction and inadequate slope beneath the original concrete. - The team evaluated soil conditions, existing grade and drainage behavior across all three areas before excavation began. - Because parts of the work connected to the driveway apron and public right-of-way, the team submitted grading plans, drainage calculations and material specifications to Los Angeles County. - The driveway uses dense, vehicle-rated concrete pavers in a running-bond pattern. - The front walkway uses tumbled, travertine-look pavers in a herringbone pattern. - The rear patio uses large-format porcelain pavers with a contrasting stone border. - Material selection factored in slip resistance, color retention and resistance to cracking, fading and shifting. - Crews removed the existing concrete and excavated to the depth needed for a compacted aggregate base. - The foundation included a Class II road base compacted in lifts, followed by a screeded bedding sand layer. - The masonry team laid pavers by hand and cut units around drains, planters and structural edges. - Polymeric sand was swept into the joints and activated to lock the pavers in place, deter weed growth and resist erosion. - Edge restraints were installed along all perimeters to prevent shifting. - Corrective grading directed water away from the foundation and toward the property's existing storm drainage system. - The team completed a walkthrough, checked joint consistency, surface leveling and drainage performance, and ran a simulated water test. - After the final county inspection, the pavers were sealed to deepen color and protect against staining and wear.

Between the lines: - The project shows how residential hardscape work can blend design and infrastructure fixes in one build. - The permitting and drainage work mattered as much as the visual design because the site tied into public-right-of-way conditions. - The material mix suggests the homeowner wanted each outdoor zone to have a different look while still keeping the property visually cohesive. - Lead Project Manager Joshua Farkash said the project demonstrates how the right materials, planning and installation process can change how a family uses outdoor space.

What's next: - Way to Go Builders is positioning its paver work as part of broader outdoor living transformations across Southern California. - The company says it continues to offer custom paver design and installation, driveways, patios, walkways and 3D visual planning for homeowners. - Homeowners interested in similar upgrades can find more information through the company's social channels and professional profile, including Instagram, Facebook, YouTube, TikTok and Houzz.